P0 P6 P5 P4 P3 QUALITY LEVER 30205 30205XR 30205 JR 30205J2 30205Q Taper Roller Bearing for automotive and machinery
This is a factory and the products are sold at the factory price (below the market price). Don't you want to have a try?
Product introduction:
30205 J2/Q Single Row Tapered Roller Bearing 30205 J2/Q is a high-quality bearing designed for use in various industrial applications. It has a dimension of 25 mm x 52 mm x 16.25 mm, making it compact and easy to install. The bearing is made of high-grade materials that ensure durability and longevity, even in harsh operating conditions.
The tapered roller design of the bearing allows it to handle both radial and axial loads, making it suitable for use in applications that require high load-carrying capacity. The bearing's design also reduces friction and heat generation, which helps to extend its service life.
30205 J2/QSingle Row Tapered Roller Bearing 30205 J2/Q is easy to install and maintain. It has a simple design that allows for quick and easy replacement when necessary. The bearing is also designed to operate quietly, which makes it ideal for use in applications where noise is a concern.
The bearing is suitable for use in a wide range of applications, including automotive, industrial, and agricultural machinery. It is commonly used in gearboxes, transmissions, and wheel hubs, among other applications.
Dimensions
| d | 25 mm | Bore diameter |
| D | 52 mm | Outside diameter |
| T | 16.25 mm | Total width |
| d1 | ≈38 mm | Shoulder diameter of inner ring |
| B | 15 mm | Width of inner ring |
| C | 13 mm | Width of outer ring |
| r1,2 | min.1 mm | Chamfer dimension of inner ring |
| r3,4 | min.1 mm | Chamfer dimension of outer ring |
| a | 12.33 mm | Distance side face to pressure point |
Abutment dimensions
| da | max.32 mm | Diameter of shaft abutment |
| db | min.31.5 mm | Diameter of shaft abutment |
| Da | min.44 mm | Diameter of housing abutment |
| Da | max.46 mm | Diameter of housing abutment |
| Db | min.48 mm | Diameter of housing abutment |
| Ca | min.2 mm | Minimum width of space required in housing on large side face |
| Cb | min.3 mm | Minimum width of space required in housing on small side face |
| ra | max.1 mm | Radius of shaft fillet |
| rb | max.1 mm | Radius of housing fillet |
Calculation data
| Basic dynamic load rating | C | 38.1 kN |
| Basic static load rating | C0 | 33.5 kN |
| Fatigue load limit | Pu | 3.45 kN |
| Reference speed | | 11 000 r/min |
| Limiting speed | | 13 000 r/min |
| Limiting value | e | 0.37 |
| Calculation factor | Y | 1.6 |
| Calculation factor | Y0 | 0.9 |
Product presentati
| Product model | 30205 J2/Q | specification | Standard - Dust proof | Inner and outer ring material | steel | Oil lubrication speed | 9000 |
| Product type | TAPPER ROLLER BEARING | Rolling element material | steel | Size specifications | metric system | Model | 30205 J2/Q |
| General shipping date | Inquiry | Seal part structure | Open type | Inner diameter d | 25 | Internal clearance symbol | CM |
| Load direction | radial | Internal clearance symbol | CM | Outer diameter D | 52 | Accuracy (JIS) | Level 0 |
| Raceway wheel shape | Ball | Accuracy (JIS) | Level 0 | Width B(mm) | 16.25 | Grease lubrication speed | 70 |
| WEIGHT | 0,153 KG |
| SECTION | TAPERED ROLLER BEARING |
| N° EAN13 | 7316577744807 |
| INNER DIAMETER | 25 MM |
| OUTER DIAMETER | 52 MM |
| WIDTH | 16,25 MM |
| PACKAGING | 1 |
| PRODUCT REF | 30205-J2/Q |
More size:
| 30200series |
| Bearing Number | Dimension | Weight(kg) |
| 30205 | 25*52*16.5 | 0.15 |
| 30206 | 30*62* 17.5 | 0.232 |
| 30207 | 35*72*18.5 | 0.31 |
| 30208 | 40*80*20 | 0.4 |
| 30209 | 45*85*21 | 0.474 |
| 30210 | 50*90*22 | 0.522 |
| 30211 | 55*100*23 | 0.709 |
| 30212 | 60*110*24 | 0.901 |
| 30213 | 65*120*25 | 1.1 |
| 30214 | 70*125*26.5 | 1.27 |
| 30215 | 75*130*27.5 | 1.35 |
| 30216 | 80*140*28.5 | 1.65 |
| 30217 | 85*150*31 | 2.1 |
| 30218 | 90*160*33 | 2.52 |
| 30210 | 95*170*35 | 3.17 |
| 30220 | 100*180*37.5 | 3.8 |
| 30221 | 105*190*39.5 | 4.5 |
| 30222 | 110*200*41.5 | 5.16 |
| 30224 | 120*215*44 | 6.27 |
| 30226 | 130*230*44.5 | 7.43 |
| 30228 | 140*250*46.5 | 8.81 |
| 30230 | 150*270*50 | 10.2 |
| 30232 | 1600*2900*53 | 13.4 |
| 30234 | 170*310*52 | 16.6 |
| 30236 | 180*320*58 | 17.8 |
| 30300series |
| Bearing Number | Dimension | Weight(kg) |
| 30305 | 25*62*18.5 | 0.25 |
| 30306 | 30*72*21 | 0.393 |
| 30307 | 35*80*23 | 0.496 |
| 30308 | 40*90*25.5 | 0.7 |
| 30309 | 45*100*27.5 | 0.954 |
| 30310 | 50*110*29.5 | 1.33 |
| 30311 | 55*120*32 | 1.61 |
| 30312 | 60*130*34 | 2 |
| 30313 | 65*140*36.5 | 2.53 |
| 30314 | 70*150*38.5 | 3.09 |
| 30315 | 75*160*40.5 | 3.54 |
| 30316 | 80*170*43 | 4.5 |
| 30317 | 85*130*45 | 5.25 |
| 30318 | 90*190*47 | 5.79 |
| 30319 | 95*200*50 | 7.2 |
| 30320 | 100*215*52 | 8.27 |
| 30321 | 105*225*54 | 10.5 |
| 30322 | 110*240*55 | 11.4 |
| 30324 | 120*260*60 | 13.8 |
| 30326 | 130*280*64 5 | 20.5 |
| 30328 | 140*300*68.5 | 21.2 |
| 30330 | 150*320*73 | 27.4 |
| 31300series |
| Bearing Number | Dimension | Weight(kg) |
| 31308 | 40*90*25.5 | 0.66 |
| 31309 | 45*100*27.5 | 0.974 |
| 31310 | 50*110*29.5 | 1.23 |
| 31311 | 55*120*32 | 1.5 |
| 31312 | 60*130*34 | 1.92 |
| 31313 | 65*140*36.5 | 2.29 |
Bearing :30201 30202 30203 30204 30205 30206 30207 30208 302009
Quality:P0,P2,P3,P4,p5,p6
addition:ZZ ZN N M JR JQ J2 X2
Product picture:
Our advantages:
1. Let’s talk—we have NO barrier in language
2. Write us for quotation---reply you within 24 hours,one quotation could be ready in 2mins for a
ready products!
3. Strong part number database. If you can provide the right model and part number, we can supply
the right product.
4. Professional and experienced salesperson.
5. Strict and complete company rules. We will try our best to meet customer’s delivery time. Before
delivery, we must verify the part number or pictures of products one by one, to make sure that
customers can receive high-quality and right-quantity goods.
6. Good management system. No matter how big or small order, as long as customers place the order, we
will provide exporting services free of charge.
7. Good service attitude. As long as customers’ requirements are reasonable, we will endeavour to make
them satisfied.
FAQ:
Q : Do your product have quality guaranteed?
A : Sure.First of all, we have a group of responsible workers.However, if the product quality problem occurs
within one year, we will replace the goods for you or refund your money.
Q : Can your company provide sample?
A : Yes, if you want to check the goods, we can provide sample.
Q : How can i trace my order ?
A : We‘ll send you tracing no. by email and upddated details to you in time.
Q : What should we do if we can't find what we want on your website?
A :You can email us the descriptions and pictures of the products youneed,we will check whether we have them. We develop new itemsevery month, and some of them have not been uploaded to website in time. Or you can send us sample by express, we will develop this itemfor bulk purchasing.
Q : Why choose us?
A :
1. Let’s talk—we have NO barrier in language
2. Request for more item information---there are nearly 2000 products for your option!
3. Write us for quotation---We will have a ready - made product ready within 2 minutes of receiving the
quotation.
